TSW-560/TSW-760/TSW-1060:
5", 7", and 10.1" Touch Screens
Access the Setup Screens
The setup screens enable basic configuration prior to regular operation of the
Crestron
screen, touch the display screen while applying power to the touch screen.
The Crestron TSW-560, TSW-760, and TSW-1060 are functionally similar. For simplicity
within this guide, the term "touch screen" is used except where noted.
NOTE:
that are described in this guide, but the appearance and layout of the screens have been
modified for portrait orientation.
NOTE:
screen defaults to the main setup screen.
During regular operation of the touch screen, there are four methods for accessing the
setup functions:
Supplemental Guide – DOC. 7927F
®
TSW-560, TSW-760, and TSW-1060 touch screens. To display the main setup
The Crestron TSW-560P 5" portrait touch screen provides the same setup screens
If no project has been loaded or if an invalid project has been loaded, the touch
Place a button on the project main page, and assign the reserved join number
(17242) that activates setup.
Tap the hard keys labeled below as 1, 2, 3, and 4 in sequence twice
(tap 1, 2, 3, 4, 1, 2, 3, 4) within a 5-second period.
Place five fingers on the display and hold for 15 seconds.
Enter the IP address of the touch screen into a web browser.
Touch Screen Hard Key Assignment
TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens • 1