Crestron TSW-560 Supplemental Manual page 6

NOTE:
the previous page. For more information, refer to "Access the Setup Screens" in the
TSW-560P DO Guide (Doc. 7973) at www.crestron.com/manuals.
The main Setup screen is displayed (TSW-760 shown).
TSW 760 Setup Screen
The Setup screen provides buttons for Ethernet setup, IP table setup, audio setup, display
setup, standby timeout, and diagnostics. There is also a button to toggle system messages
on or off, and an About button provides information about the touch screen. Additionally,
the screen displays the IP address, the hostname, and the MAC address of the touch
screen. The functions of each button are detailed in the following pages of this guide.
NOTE:
button (
can be tapped to save all settings, to exit the setup screens, and to return to the main
project.
2 • TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens
The hard key button assignment for the TSW-560P differs from the illustration on
A toolbar is present on the bottom of all setup screens. The toolbar provides a gear
) that can be tapped to return to the Setup screen and a Save & Exit button that
Supplemental Guide – DOC. 7927F