Authentication Management - Crestron TSW-560 Supplemental Manual

Time Configuration
•
•
•

Authentication Management

Click the Authentication Management tab to configure authentication management for
touch screen users and groups and to allow different levels of access to touch screen
functions.
Settings - Authentication Management
Click the Enable Authentication button to toggle between turning authentication on or off
on the touch screen. (Authentication is disabled by default.)
When authentication is turned on, the web configuration interface prompts the user to enter
a new administrator username and password. After rebooting the touch screen, this
username and password must be entered to access the web configuration utility or to
access the touch screen through Crestron Toolbox™ software.
CAUTION:
must be restored to factory defaults to reset the username and password.
Use the following Authentication Management settings to add, delete, and edit touch
screen users and groups.
Supplemental Guide – DOC. 7927F
Time Zone: If Enable Time Synchronization is set to Off, selects the time zone of
the touch screen
Time(24hr Format): If Enable Time Synchronization is set to Off, sets the time for
the touch screen, in 24-hour format.
Date: If Enable Time Synchronization is set to Off, sets the date for the touch
screen (Use the pop-up calendar window to select the day, month, and year.)
Do not lose the administrator username and password, as the touch screen
TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens • 31