Crestron TPS-6X Series
Operations Guide – DOC. 6875B
CALIBRATION MENU
Touch the Touch Screen Calibration button to enter the CALIBRATION MENU.
CALIBRATION MENU
Touch Perform Calibration. The message "Touch Upper Left +" appears centered
on the panel with a crosshair in the upper left corner. Touch the center of the
crosshair in the corner of the screen to initiate calibration. Another message, "Touch
Upper Right +", appears with a crosshair in the correct corner. Touch the center of
the crosshair in the corner of the screen. A final message, "Touch Lower Right +",
appears with the crosshair in the correct corner. Touch the center of the crosshair in
the corner of the screen to conclude calibration and return to the MAIN MENU.
NOTE: When touching the screen during calibration, be as accurate as possible.
Use the tip of a capped pen or the eraser end of a pencil. To cancel calibration and
return to the MAIN MENU without saving calibration data, create a calibration error
by touching the screen in the same spot two times. If calibration has not been started,
you can return to the MAIN MENU by touching RETURN.
Isys™ 5.7" Wireless Touchpanels
Isys™ 5.7" Wireless Touchpanels: TPS-6X Series • 15