Rtsp Test - Crestron TSW-560 Supplemental Manual

The Rava Settings screen provides controls to switch between Peer to Peer Mode and
SIP Server Mode, and when set to the latter, controls to switch between Normal Mode
and Door Mode. Touching the other fields on the screen opens the on-screen keyboard or
on-screen numeric keypad as appropriate.
When all settings are entered, touch Apply to store them or < Back to ignore any changes.
Touching either option returns the display to the Rava Diagnostics screen.
Tap < Back again to return to the Diagnostics screen.

RTSP Test

On the Diagnostics screen, tap RTSP Test to display the RTSP Stream Diagnostics
screen.
RTSP Stream Diagnostics Screen
Use the RTSP Stream Diagnostics screen to test whether Real Time Streaming Protocol
(RTSP) is functioning on the touch screen.
Tap the text field below H264 Stream Source URL: (Touch to edit) to open the on-screen
keyboard (not shown). Enter the URL for an H.264 video stream source, and then tap Save.
The video stream is displayed in the lower right portion of the RTSP Stream Diagnostics
screen.
Tap the up and down arrows on the left side of the screen to raise or lower the volume of
the video stream, from 0 to 100%, and tap On or Off under Mute to mute or unmute the
volume of the video stream.
Tap < Back to return to the Diagnostics screen.
TSW-560/TSW-760/TSW-1060: 5", 7", and 10.1" Touch Screens • 17
Supplemental Guide – DOC. 7927F