Preparing a VFC400-WiFi for first use
Preparing a VFC400-WiFi for first use
Before your VFC400-WiFi can record temperature data and upload readings to LogTag
perform a few setup steps.
In the office
These steps are completed in your office, using a PC connected to the internet.
install the backup batteries
l
download and install the latest version of Control Solutions VTMC 3. You can do this from the
l
Solutions, Inc. Software Download page
configure
the unit using Control Solutions VTMC
l
connect the VFC400-WiFi to your wireless network using the
l
complete the device setup in
l
On-site
Once you have completed this process you can take the logger to the location where it will be installed and
connect external power
l
connect a sensor
and place the unit, preferably using a wall mount bracket
l
start the logger
l
test the connection
l
You can find more information about connecting and setting up your network connection in
Connectivity on
page 18.
VFC400-WiFi User Guide
into the unit
®
LogTag
Online, including associating the VFC400-WiFi with a location
®
to LogTag
Online to verify data can be successfully uploaded.
®
Online you need to
LogTag Online Connection Wizard
Wireless
8
Control
Need help?
Do you have a question about the LogTag VFC400-WiFi and is the answer not in the manual?