Stopping The Vfc400-Wifi - CONTROL SOLUTIONS LogTag VFC400-WiFi Product User Manual

Stopping the VFC400-WiFi

Stopping the VFC400-WiFi
You can configure a VFC400-WiFi so it can be stopped with the
useful when you take the logger out of a shipment and don't want to falsify the statistics with readings taken
after the shipment completion. The stop function is enabled in the
When enabled, following will stop the unit:
Press and hold the
START
shown in addition to the
Keep holding the button until the
then release the button within 2 seconds.
is shown permanently on the display and the logger
STOPPED
will no longer take readings.
The last recorded temperature is now no longer shown, but
minimum and maximum trip values remain.
The logger will not stop if you:
release the button before the
l
keep holding the button after
l
permanently on until the
The VFC400-WiFi will now connect to LogTag
upload any outstanding temperature readings.
Once the logger has stopped, the last alarm status before the logger stopped will continue to be
indicated with a cross or a tick symbol on the display, but the audible alarm and the alarm LED will
turn off (see exception
VFC400-WiFi User Guide
button.
STOPPED
/CLEAR/STOP
symbol.
symbol disappears,
symbol disappears
remains
STOPPED
symbol reappears
®
Online to
on the next page).
START
/CLEAR/STOP
Advanced Settings
is
button. This feature is
tab during configuration.
41