CONTROL SOLUTIONS LogTag VFC400-WiFi Product User Manual page 14

Preparing a VFC400-WiFi for first use
Advanced Settings
Select the Advanced Settings tab for additional configuration settings. These settings decide how some of the
elements are displayed on the unit's own display and also set other options specific to the VFC400-WiFi.
Parameters that influence the appearance of the display are
Allowing a user to reset the trip's minimum and maximum values on the display during recording
l
Parameters influencing specific behaviour of the VFC400-WiFi are
leaving the alarm turned on, even if readings return to the normal temperature range again
l
allowing the user to stop the logger with the
l
For detailed information about each parameter please read the section about Configuring a LogTag for logging
in Control Solutions VTMC's User Guide or press F1 for help.
Wireless and Network Connection Settings
The VFC400-WiFi's wireless connection parameters are set up on the
Select Leave wireless and network settings unchanged
want the VFC400-WiFi to connect to the same network as before. Selecting this option will retain the wireless
and network parameters currently stored inside the unit.
Select Start the Control Solutions Online Connection Wizard
existing settings. In this case the
Solutions VTMC has finished configuring the VFC400-WiFi for logging. Factory-new units do not have any
settings and you will need to run the wizard to connect these to LogTag
VFC400-WiFi User Guide
START
/CLEAR/STOP
if you are only changing the logging parameters, but
Control Solutions Online Connection Wizard
button
WiFi Settings tab.
if you need to enter new settings, or amend
will start as soon as Control
®
Online.
14