Push Button Start With Start Delay - CONTROL SOLUTIONS LogTag VFC400-WiFi Product User Manual

Starting the Logger
Once disappears, release the button within two
READY
seconds. will now disappear, and the
STARTING
symbol will be shown. The VFC400-WiFi now records
temperature data.
The logger will not start if you...
... release the button before
... keep holding the button for more than 2 seconds after
disappears.
READY
... The backup battery is critically low and the logger is not
connected to power.
The VFC400-WiFi now automatically performs a Connection Test
connection on page 20).

Push Button Start with Start Delay

If the logger has been configured for a push button start with a
start delay, the word
STARTING DELAY
the symbol.
The delay time is shown in hours and minutes. The time
counts down and the VFC400-WiFi starts recording when it
reaches 0:00.
The WiFi connection symbol is shown with a tick, if the
VFC400-WiFi successfully connected to the wireless network
directly after configuration with Control Solutions VTMC.
As with a regular push button start without delay, the VFC400-WiFi will perform a
the recording has started. To check the connection before the delay value has elapsed, you can initiate the
connection test yourself. Please refer to
The timer can be cancelled and the logger reset to
While and
STARTING DELAY
button.
START
/CLEAR/STOP
the button when
STARTING
and will both disappear, and
STOPPED DELAY
show, together with the current time, and the logger can now
be started again as normal.
The VFC400-WiFi will not be reset if you ...
... release the button before
... if you keep holding the button until
disappears.
VFC400-WiFi User Guide
disappears
READY
is shown instead of
Testing your wireless and network connection (on
READY
are shown, press and hold the
will now show. Release
STOPPED
disappears.
READY
disappears, or
STARTING
STOPPED
(see Testing your wireless and network
Connection Test
.
will
30
as soon as
page 20).