CONTROL SOLUTIONS LogTag VFC400-WiFi Product User Manual page 51

Airplane Mode
Airplane Mode
A VFC400-WiFi can be switched to airplane mode to comply with airlines' regulations for wireless transmission
in aircraft. You can enable Airplane mode using the buttons on the VFC400-WiFi:
Press and hold the
l
simultaneously.
Keep holding the buttons while the Airplane mode
l
symbol ( ) on the display blinks.
After approximately 6 seconds the symbol stops blinking
l
and turns on permanently. Release the buttons.
Airplane Mode is now turned on, and all wireless functionality
is disabled. Cloud and WiFi connection symbols are off.
After removal of the logger from the aircraft, airplane mode can be turned off, using the exact same procedure:
Press and hold the
l
simultaneously.
Keep holding the buttons while the Airplane mode
l
symbol ( ) on the display blinks.
After approximately 6 seconds the symbol stops blinking
l
and turns on permanently. Release the buttons.
Airplane Mode is now turned off, and the wireless functionality
is enabled. Cloud and WiFi connection symbols will turn on
successively as they go through the process of connecting to
®
LogTag Online.
Replacing the Batteries
When the display shows that the battery is almost empty (
as described in Inserting the Batteries on
procedure.
VFC400-WiFi User Guide
and
F START
N /CLEAR/STOP
and
F START
N /CLEAR/STOP
page 9. Remove the old batteries and complete the remainder of the
buttons
buttons
) new batteries should be fitted. Open the case
51