Data Communication By Connecting With Computer - XIEGU X5105 Operation Manual

Operation
Amateur radio data communications by connecting with computer
X5105 transceiver can be connected with computer and complete all kinds of data communications under the help of
computer softwares.
Operation and connection methods:
1. Connect computer audio output/input to X5105 from ACC interface (MINI-DIN8).
2. Insert attached data cable into COM (or CIV) interface, connect X5105 with computer, and ensure that drive of
computer of data cable is correctly installed and PC software can control the X5105 transceiver;
3. Adjust the volume of X5105 and input/output volume of ACC interface to a proper level and observe software
interface to avoid communication failure caused by excessive audio range.
4. Select corresponding working modes, i.e., carry out data communication.
 Radio and computer must be well grounded to avoid interference, and EMC magnet ring shall be
installed for data cable and audio cable at the position close to main machine of radio to greatest extent.
53