Transceiver Start And Shutdown - XIEGU X5105 Operation Manual

Routine operation

Transceiver start and shutdown

1. Start the transceiver: press and hold the
switch key for 1s.
2.Shut down the transceiver: press and hold
the switch key for 1s under startup state.
★Important notes:
Please turn off the equipment correctly according to above method after using it. If external power supply is directly
cut off, current working data can not be saved and large impact and faults will be caused to built-in power units.
 Hard reset:press and hold startup key for above 8s to reset the built-in main controller and shut the equipment
down compulsively when system of main machine is crashed, such as no response of keys or failure of exiting
transmitting state and keys.
34
Operation
Switch key
T/R DATA
PRE
MODE
ATT
NB RIT
MENU
X5105
LINK
V/M
<
A/B
ATU
LOCK
Po