Computer Control Instructions - XIEGU G106 Operation Manual

Computer control instructions

G106 adopts CI-V instruction sets. You can remotely control the transceiver based on standard instructions of the instruction set or configure
control instructions of other software to enable the control over G106.
Wave band voltage data
The ACC interface of G106 provides wave band data of four frequency bands, which can control the peripheral device to automatically switch
the wave band or identify the wave band information for other devices.
Wave
Band
/
3.5MHz
5.0MHz
Appendix 1
Wave
Voltage Voltage
Band
/ 7MHz 920mV
460mV 10MHz 1150mV
690mV 14MHz 1380mV
Wave
Voltage
Band
18MHz 1610mV 28MHz
21MHz 1840mV
24MHz 2070mV
21
Wave
Voltage
Band
2300mV
/ /
/ /