Computer Control Instructions; Band/Voltage Output For Ext. Amp - XIEGU G90 Operation Manual

PC control instructions
The G90 uses the standard CIV instruction set. You can use the standard commands of this instruction set to remotely control the
transceiver. It can also be used to configure the control instructions of other software to control the G90. To get going rapidly, you
can use the configuration file for another radio that uses the standard instruction set. Check the Xiegu forum for the latest
suggested compatible radio configuration files to try. (IE: IC-817 / IC-7000)
Band voltage data
The G90's ACC port provides a band data voltage output for each band. The band data can control
switch the band or share the band information with other devices. (IE: the XPA-125 amp)
Band Voltage Band
1.8MHz 230mV 7MHz
3.5MHz 460mV 10MHz
5.0MHz 690mV 14MHz
Voltage Band Voltage
920mV 18MHz 1610mV
1150mV 21MHz 1840mV
1380mV 24MHz 2070mV
peripheral to automatically
Band Voltage
28MHz 2300mV
/ /
/ /
33