Method Of Entering End-User Accessible Maintenance Mode - Brother ADS-3600W Service Manual

1.1.2 Method of entering end-user accessible maintenance mode

The maintenance mode functions should only be accessed by service personnel. However,
end users are allowed to use some of these functions under the guidance of service
personnel over the phone. End users can only use the functions shaded in the table on the
"1.2 List of Maintenance Mode
91)
<Operating Procedure>
(1) Press and hold the
approximately five seconds while the
machine is in the ready state. The
display shown on the right appears on
the LCD.
(2) Press the blank field at the bottom. The
display shown on the right appears on
the LCD.
(3) Press the [*], [0], and [#] keys on the
LCD in this order. The machine enters
to the ready state to accept function
code entry, so press the function code
you want to execute.
(4) Each time the selected maintenance
mode function is completed, the
machine returns to the ready state
automatically.
Functions". (function code:
key for
5-2
10, 12, 18, 25, 45, 54, 61, 80, 82,
Confidential