Brother ADS-3600W Service Manual page 10

Ensure that cables and cords leading to the machine are secured so as not to pose a
tripping hazard.
DO NOT place this machine on an unstable or tilted cart, stand, table or on any tilted/
slanted surface. The machine is heavy and may fall, causing injury to you and serious
damage to the machine.
Make sure that no part of the machine protrudes from the desk or stand where the
machine is located. In particular, do not leave the output tray open and extended
beyond the edge of a cabinet, table or stand when the machine is located on the edge
of a cabinet, table, stand, etc. As previously cautioned, make sure that the machine is
located on a flat, level, and stable surface free from vibration. Failure to observe these
precautions could cause the machine to fall, causing injury to you or others and
serious damage to the machine.
Important
• DO NOT place your machine next to sources of interference, such as speakers or
the base units of non-Brother cordless telephones. Doing so may interfere with the
operation of the machine's electronic components.
• DO NOT connect your machine to an AC power outlet controlled by wall switches or
automatic timers. Disruption of power can delete information from the machine's
memory, and repeated cycling of the power can damage the machine.
• DO NOT put objects on top of the unit.
WARNING
ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock.
In addition, you could create an electrical short, which may create the risk of a fire.
vii
Confidential