Brother ADS-3600W Service Manual page 137

Error display
CS ERR L Dirt on the first side CIS or
calibration sheet
(detected that the data acquired on
the first side CIS was out of normal
range)
CS ERR UL Dirt on the first and second side
CIS or calibration sheet
(detected that the data acquired on
the first and second side CIS was
out of normal range)
Doc Set Pos ERR Calibration sheet is set to the
wrong position
GT ERR U Dirt on the second side CIS or gray
tape
(detected that the data acquired on
the gray tape of the second side
CIS was out of normal range)
GT ERR L Dirt on the first side CIS or gray
tape
(detected that the data acquired on
the gray tape of the first side CIS
was out of normal range)
GT ERR UL Dirt on the first and second side
CIS or calibration sheet
(detected that the data acquired on
the gray tape of the first and
second side CIS was out of normal
range)
REMOVE Calibration sheet is not removed
DOCUMENT
Cause
Clean the first side CIS or
calibration sheet.
Clean the first and second side CIS
or calibration sheet.
Reset the calibration sheet.
Clean the second side CIS unit. Or
replace the second side CIS.
Clean the first side CIS unit. Or
replace the first side CIS.
Clean the first and second side
CIS. Or replace the first and
second side CIS.
Remove the calibration sheet.
5-15
Remedy
Confidential