1.3
Details of Maintenance Mode Functions
1.3.1 Initialize EEPROM parameters (function code: 01, 91)
<Function>
This function is used to initialize the setting values for operation parameters, user switches,
and worker switches (WSW) registered in the EEPROM. Entering function code 01 initializes
most EEPROM areas. Entering function code 91 initializes only the specified areas as shown
in the table below.
Counter information
Error history
MAC address
Worker switches
User switches (items initialized when
"Factory Reset" is executed)
Function settings except user switches
(settings not subject to "Factory Reset")
LAN setting
<Operating Procedure>
(1) Press the [0] and [1] keys in this order in the initial state of maintenance mode to display
"PARAMETER INIT" (or press the [9] and [1] keys as appropriate) on the LCD.
(2) When initializing parameters is completed, the machine returns to the initial state of
maintenance mode.
Note:
• Function code: 01 is for service personnel. Function code: 91 is for user support.
Data item
Function code: 01
Areas not to be
initialized
Areas to be initialized
5-4
Function code: 91
Areas not to be
initialized
Areas to be initialized
Confidential