Wireless Ap Overview - Extreme Networks ExtremeCloud Appliance Series User Manual

Appliance Product Family
ExtremeCloud Appliance supports the VE6120 virtual appliance and the following hardware appliances:
•
E1120
•
E2120
•
E3120

Wireless AP Overview

Extreme Networks APs use the 802.11 wireless standards (802.11a/b/g/n/ac/ax) for network
communications, and bridge network traffic to an Ethernet LAN. In addition to the wireless APs that run
proprietary software and communicate with an appliance only, Extreme Networks offers a Cloud-
enabled AP. The AP39xx series are Cloud-enabled APs that inter-operate fully with ExtremeCloud
other ExtremeWireless products.
The following ExtremeMobility
•
AP505i
•
AP510i/e
•
AP560i/h
The following ExtremeWireless
•
AP3917i/e/k
•
AP3916ic
•
AP3915i/e
•
AP3912i
•
AP3935i/e
•
AP3965i/e
The following ExtremeWireless WiNG
•
AP7522
•
AP7532
•
AP7562
•
AP7612
•
AP7632
•
AP7662
•
AP8432
•
AP8533
The Extreme Networks
A wireless AP physically connects to a LAN infrastructure and establishes an IP connection to
ExtremeCloud Appliance, which manages the AP configuration through the Wireless Assistant. The
appliance provides both distributed and centralized management (verification and upgrade) of the AP
firmware image.
ExtremeWireless AP39xx support a Centralized site. ExtremeWireless WiNG APs support a Distributed
site. The ExtremeMobility AP5xx support either a Centralized or Distributed site. The AP5xx support is
determined by the site type at discovery and registration.
ExtremeCloud Appliance User Guide for version 4.36.03
™
AP5xx series APs are supported:
™ AP39xx series APs are supported:
™
APs are supported:
®
Defender Adapter SA201 is supported.
Welcome to ExtremeCloud Appliance
™ and
9