Extreme Networks ExtremeCloud Appliance Series User Manual page 82

iBeacon Scan Settings
Table 30: iBeacon Scan Settings
Field
Application
Destination IP Address
Destination Port
Scan Interval
Scan Window
UUID
Min RSSI
Related Links
iBeacon Settings on page 81
Eddystone-url Beacon Settings
Eddystone-url Scan Settings
Thread Gateway Settings
Eddystone-url Beacon Settings
Table 31: Eddystone-url Beacon Settings
Field
Application
URL
ExtremeCloud Appliance User Guide for version 4.36.03
Description
Determines application type. Select iBeacon Scan.
IP address of the customer Application Server that receives the
beacon report.
Destination Port on the customer Application Server that presents the
beacon report.
Determines how long to wait between scans. Valid values are: Min
(100ms) and Max (10240ms). The default value is Min (100ms).
Determines how long to scan per channel. Valid values are Min
(100ms) and Max (10240ms).Value must be less than Scan Interval
value. Default value is 100ms.
Identifier used to differentiate a large group of related beacons. A
company can have a network of beacons with the same UUID.
Used for filtering data. ExtremeCloud Appliance forwards data with
matching UUID to the Application Server and filters out all other UUID
data. If UUID configured value is all zeros, no filtering occurs.
This is the signal strength required to include the packet in the BLE
report. Valid values: -10 to -100. Default value is -100. Data from
beacons with an RSSI that is less than the Min RSSI configured value is
filtered out.
on page 82
on page 83
on page 84
Description
Determines application type. Select Eddystone-url Beacon.
The URL that is included with the Eddystone-url beacon.
The URL is limited to 17 characters. The 17 characters does not include
the protocol, but it does include the domain name. A secure protocol
(HTTPS address) is required. The URL is compressed, effectively
allowing more than a 17-character input. See
google/eddystone/tree/master/eddystone-url
compression rules to more accurately judge the length of your URL. If
necessary, also find third-party URL Shortening Services available on
the internet.
Configure
https://github.com/
for the Eddystone-url
82