Extreme Networks ExtremeCloud Appliance Series User Manual page 202

Working with SNMP Notifications
Working with SNMPv2 Communities
Working with SNMP Notifications
To work with SNMP notifications:
1 Go to Administration > System > Settings > SNMP.
2 Find the SNMP Notifications field.
3 To add a notification:
1
2 Enter the following:
3 Click Add.
4 To modify notification settings, select a notification from the list and click Edit.
5 To delete a notification, select a notification from the list and click Delete.
Related Links
SNMP Configuration
Working with SNMPv3 Users
NEW!
MAC Format
ExtremeCloud Appliance provides the ability to define the user MAC address format for MAC-based
authentication. Select from a set of MAC encoding formats, to match the format that you are using in
your existing authentication infrastructure.
Select the MAC address format and click Save.
NEW!
NSight Configuration
ExtremeCloud Appliance can function as a proxy server for NSight. Configure the NSight server here:
1 Go to Administration > System > Setting.
2 Under NSight Configure, provide the following:
Connection
IP Address
ExtremeCloud Appliance User Guide for version 4.36.03
Click Add.
•
Notification name
•
SNMP version
•
IP address and UDP Port of the server that will receive SNMP messages.
Note
You can create two trap destinations for SNMP Notification. Set the type of message that
you will trap from the Forward Trap field on the SNMP configuration page.
on page 199
on page 201
on page 202
on page 201
HTTPS
IP address of NSight server
Administration
202