Extreme Networks ExtremeCloud Appliance Series User Manual page 68

Table 21: Device Group Settings
Field
Name
Profile
RF Management
APs
Related Links
Adding or Editing a Configuration Profile
Advanced Configuration Profile Settings
Configuring Smart RF Policy
AP Adoption Rules
Adding or Editing a Configuration Profile
ExtremeCloud Appliance is installed with a default configuration profile for each AP platform. You can
modify the default profile or create a new profile, but default profiles cannot be deleted.
New profiles display the configuration settings that were delivered with your initial ExtremeCloud
Appliance installation. After making changes, if you need to return to a base ExtremeCloud Appliance
configuration, create a new profile for the AP platform. The new profile will consist of the initial settings.
Before configuring a unique configuration profile, configure the networks and roles associated with the
new profile.
1 From the Configure Sites page, select the Device Groups tab and click Add to add a new device
group. Or,
Select a device group from the list.
ExtremeCloud Appliance User Guide for version 4.36.03
Description
Device Group name.
The configuration profile associated with the device group. Each AP
platform has a default configuration profile. Select the default profile
from the list or click
The RF Management profile associated with the device group.
ExtremeCloud Appliance includes a default RF policy.
•
If the site is Centralized, the device group is composed of APs that
use Default ACS.
•
If the site is Distributed, the device group is composed of APs that
use Default Smart RF.
Select the default profile from the list or click
policy.
List of APs that match the configuration Profile and Site regulatory
domain. In order for an AP to be included in a device group:
•
The regulatory domain of the AP must correspond with the site
Country value.
•
The configuration Profile of the device group must match the AP
model number.
Select each AP to include in the device group. Then, click OK. To
organize your AP deployment automatically, create Adoption Rules.
Note: You may need to create more than one configuration Profile per
AP model, depending on the configuration settings you enable.
on page 68
on page 72
on page 91
on page 142
to create a unique profile.
to create a unique RF
Configure
68