Extreme Networks ExtremeCloud Appliance Series User Manual page 207

Upgrading an Application
Uninstalling an Application
Application Details
Extreme Defender for IoT
NEW!
Configuration Template Details
Use a configuration template to install and upgrade container applications in ExtremeCloud Appliance.
To add a template:
1 Go to Administration > Applications and click Add.
2 Configure the following parameters:
Table 82: Container Application Configuration Template
Field
Name
Title
Description
Proxy URL
Icon
Image
Entry Point Arguments
Registry
Upload File Format
ExtremeCloud Appliance User Guide for version 4.36.03
on page 208
on page 209
on page 209
on page 210
Description
Application name
Application title
Text description
Check to enable a URL proxy for your application. Clear to disable a
URL proxy.
Consider the following when using Proxy URL:
•
Applications are accessible through
apps/<appname>.
•
Once installed, the application can be accessed directly from
ExtremeCloud Appliance.
•
The internal port in the container must be TCP port 8887.
•
The base URL must begin with the application name. For
example: /defender.
•
The application must use relative URLs.
The application icon. Click Change to select a new image file. After
selecting a new image file, the Default button appears. Click Default to
revert to the default image.
The application image file name that is used in the Docker Registry. Or,
for local files, the application name that is tagged in the local Docker
file.
Program used to start the application. The Entry Point Arguments are
provided by the container application by default. Provide a value only
if you must override the default Entry Point Arguments.
Note: Docker command line options, such as
supported.
Docker Hub is the only supported registry.
Local file format.
Administration
https://ip:5825/
privileged , are not
207