Extreme Networks ExtremeCloud Appliance Series User Manual page 13

•
Air Defense integration parameters
•
ExtremeLocation integration parameters
•
RTLS
•
Profiles for Centralized APs support the following features:
IoT configuration
Positioning
Analytics
•
An RF Management policy.
Note
RF Management and configuration Profiles can be shared across device groups.
Note
Most AP radio properties depend on a regulatory domain; which is defined at the site level.
Devices that are connected to ExtremeCloud Appliance but not assigned to a device group
have the status of In-Service Trouble. Devices that have not discovered ExtremeCloud
Appliance have the status of Unknown.
Related Links
Adding Device Groups to a Site
Device Group Settings
AP Adoption Rules
Floor Plans on page 16
Site Parameters on page 65
Profiles
Configuration profiles in ExtremeCloud Appliance offer consistency and simplicity. Use a profile to
associate configuration parameters to a device group, and to apply configured network policy roles to
the group. You can associate a single profile to one or many device groups within a single site or across
multiple sites.
Profiles are used to configure APs and individual radios. The available configuration options depend on
the AP model. The full list of configuration settings are as follows:
•
Network configuration
•
Policy configuration
•
Radio settings
•
Port assignment
•
IoT configuration
•
AirDefense Service Platform (ADSP) integration
•
ExtremeLocation integration
•
Position Awareness configuration
•
Analytics
•
Real-Time Location System (RTLS) integration
ExtremeCloud Appliance User Guide for version 4.36.03
on page 67
on page 67
on page 142
Welcome to ExtremeCloud Appliance
13