Replacing Back Or Headrest Upholstery; Replacing Back Upholstery; Replacing Headrest Upholstery - Invacare 3G Storm Series Owner's Operator And Maintenance Manual

Replacing Back or Headrest Upholstery

NOTE: For this procedure, refer to FIGURE 14.2.

Replacing Back Upholstery

1. Remove the ten or twelve mounting screws (depending on back height) that secure the
back upholstery to the back canes.
2. Remove existing back upholstery from back canes.
3. Install the new back upholstery onto the back canes.
4. Install the ten or twelve mounting screws (depending on back height) that secure the
back upholstery to the recliner back canes.
5. Adjust the back upholstery to the desired tautness. Refer to Adjusting Back or
Headrest Upholstery on page 116.
NOTE: Changing the back upholstery height must be performed by an authorized dealer or
qualified technician.

Replacing Headrest Upholstery

1. Remove the six mounting screws that
secure the headrest upholstery to the
headrest extensions.
2. Remove the existing headrest
upholstery from the headrest
extensions.
3. Install the new headrest upholstery
onto the headrest extensions.
4. Install the six mounting screws that
secure the headrest upholstery to the
headrest extensions.
5. Adjust the headrest upholstery to the
desired tautness. Refer to Adjusting
Back or Headrest Upholstery on
page 116.
Part No 1134791
All manuals and user guides at all-guides.com
115
SECTION 14—RECLINER
Headrest Upholstery
Headrest
Extension
Back
Cane
FIGURE 14.2 Replacing Headrest
Upholstery
3G Storm Series® Wheelchairs
Mounting
Screws
Back
Upholstery