Locking/Unlocking The Pump - LMI ROYTRONIC EXCEL AD9 Series Instruction Manual,Programming Manual

SECTION 4 - OPERATION OF THE SERIES AD9

4.4 LOCKING/UNLOCKING THE PUMP

The pump has several lock modes to prevent
casual tampering. For a complete description
of the lock modes and how to configure them,
see Sec. 6.4. A Lock Icon
indicates that the pump has been locked.
Icon/Alarm Area
Lock Icon
To activate the pump lock, depress the
and MODE buttons simultaneously for about
1 second until the Lock Icon
Icon/Alarm area.
6
in the Icon/Alarm Area
DOWN
appears in the
Instruction Manual
To unlock a locked pump, depress the
and MODE buttons simultaneously for about
1 second until the Lock Icon
Icon/Alarm area or until prompted for the unlock
pass code (see below).
To enter the unlock pass code, use the
and DOWN buttons to edit each digit. Use the
POWER button to advance to the next digit. If
the pass code is incorrect, the pump will remain
locked.
Example of entering an unlock pass code
NOTE:
Activating the pump lock is effective immediately.
Do not activate unless you have made note of
the unlock pass code, which is configured in
Sec. 6.4. If the pass code is misplaced while
the lock is active, the pump must be returned
to the factory in order to be reset.
After approximately 2 minutes of inactivity, the
unlock pass code display will close and revert
back to the current control mode display.
DOWN
disappears in the
UP