Teledyne FALCON GC Operation And Maintenance Manual page 21

Falcon GC
3. Click on Configuration at the top left of this new pop up
window. This will open the instrument properties pop-up
window.
4. After you have entered all the relevant information as seen
above, click on Apply Edits to apply your changes. Notice that
the small window where it says Mod and COM Port/IP Addr will
update with your current settings.
5. Click OK. A new pop-up window will appear with the title of
Instrument and Hardware Connections. Fill out the new pop-up
window as shown below:
Teledyne Analytical Instruments
Installation
11