Setting The Falcon Gc's Ip Address; Configuring Chromperfect - Teledyne FALCON GC Operation And Maintenance Manual

Installation
cable via TCP/IP. The ethernet connection from PC to GC can either be
direct or through a network.

3.3.1 Setting the Falcon GC's IP Address

To set the IP address, first, turn on the GC using the power toggle
switch on the Utility Panel.
On the Falcon touch screen press Menu→Setup→Network to access
the network options. From here you can view or change the GC's IP
Address, Gateway, or Net Mask by pressing on their respective icons.

3.4 Configuring Chromperfect

1. Click on the "C" Chromperfect icon to open the Chromperfect
banner
2. Then click on Configure to open the configuration window.
10 Teledyne Analytical Instruments
Falcon GC