Sam4s ER-390 Series Operation And Program Manual page 182

Programming the Macro Name
Up to ten function locations may be designated as Macro keys. You may wish to program a name for a
macro. Macro names can also be helpful when looking at keyboard layout information with the PC
communication utility.
•
174 Program Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 7 1 1, press the SBTL key.
7 1 1
3. Refer to the chart below and enter the number that represents the line you wish
to program; press the X/TIME key.
X X/TIME
4. If you are programming using alpha overlay;
Type up to 18
descriptor keys
Enter up to 18
three-character
codes
5. Press the CASH key to finalize the program.
CASH
SBTL
X/TIME
or,
SBTL
ER-390 Series