Table of Contents
Advertisement
RECD ACCT
SERVICE
SBTL
TABLE #
TARE
TAX EXEMPT
TAX (1-4) SHIFT
TIP
VOID
VALID
WASTE
ADD STOCK
DEDUCT STOCK
OVERWRITE STOCK
•
20
Operating Instructions
The RECD ACCT (received on account) key is used to record media
loaned to the cash drawer, or payments received outside of a sale. The
cash drawer will open. The amount received adds to the cash-in-
drawer total.
Use to temporarily finalize Previous Balance or Table tracking
transactions.
Displays subtotal of sale including tax. Must be pressed prior to a sale
discount or sale surcharge.
Tracks the current balance for a guest check or table.
Tares are container weights. If you are using the scale function, you
can preset up to 5 different tare weights. The tare can be subtracted
automatically when a specific PLU is registered, or manually inputting
the tare number and pressing the TARE key can subtract the tare.
Tare #5 can be programmed for entering tare weights manually.
Press the TAX EXEMPT key to exempt tax 1, tax 2, tax 3, and/or tax 4
from the entire sale.
When pressed before a PLU entry, the tax shift keys reverse the tax
status of the PLU, i.e., a PLU with non-tax status would become taxable
or a PLU with tax status would become non-taxable.
The TIP key allows a gratuity to be added to a guest check before
payment. The tip amount is deducted from the Cash-in-Drawer amount
for the Clerk/Cashier closing the guest check.
The TIP key may be programmed as either a percentage or amount. If
programmed as a percentage, tax programming defines whether the
percentage is calculated on the net amount, or the amount after taxes.
Use to correct an item entered earlier within a sale. The VOID key
corrects the appropriate totals and counters. To correct the last item,
use the ERROR CORR key. For void operations outside of a sale
(Transaction Void), use the VOID position on the control lock. The
Financial report records totals for each type of void separately.
Press the VALID key to print a one-line validation on a separate form or
piece of paper. Any item registration, discount or payment may be
validated.
The WASTE key allows control of inventory by accounting for items
that must be removed from stock due to spoilage, breakage or mistakes.
Press the WASTE key before entering wasted items, and then press the
WASTE key again to finalize. The WASTE key may be under manager
control, requiring the control lock to be in the X position. The
WASTE key is not allowed within a sale.
There are three keys to program stock, (Add Stock, Deduct Stock &
Overwrite Stock). The PLU status must be set in order to allow entering
of stock.
ER-390 Series
Advertisement
Table of Contents
