Extreme Flight TURBO RAVEN EXP Assembly Manual page 6

Let's begin!
1. Locate the 2 wing panels with ailerons as well as the 2 G10 aileron control horns and base plates.
Remove the aileron and pull the hinges from the wing and aileron. Use Pacer Formula 560 Canopy Glue
to secure the hinges. This glue works very well in this application and cleans up easily with water. Apply
the glue to both the hinge holes and the hinges themselves and push the surfaces together leaving a
minimal gap between them. Use masking tape to keep the aileron in position while the glue sets. Wipe
away any excess glue with a damp paper towel.
6