Table of Contents
Advertisement
www.glp.de
Fire safety and protection from burns
• Do not operate the luminaire if the ambient temperature (Ta) exceeds 45° C (115° F).
• The surface of the luminaire's casing can reach up to 55° C (131° F) during operation.
Avoid contact by persons and materials. Do not install the luminaire in a location
where there is a risk of accidental contact. Allow the luminaire to cool for at least 10
minutes before handling
• Keep the luminaire well away from flammable materials.
• Keep all combustible materials (e.g. fabric, wood, paper) at least 100 mm (4 in.)
away from the luminaire.
• Ensure that there is free and unobstructed airflow around the luminaire. Provide a
minimum clearance of 100 mm (4 in.) around fans and air vents.
• Do not illuminate surfaces within 500 mm (19.7 in.) of the luminaire.
• Do not install a fuse that has a higher rating than the one originally installed in the
luminaire. Do not bypass fuses.
• Do not stick filters, masks or other materials onto optical components.
• The luminaire's optical components can focus the sun's rays, creating a risk of fire and
damage. Do not expose the front of the luminaire to sunlight or any other intense light
source, even from an angle.
Eye safety
• The impression FR1 TM is classified as a Risk Group 2 luminaire according to EN 62471.
Possibly hazardous radiation emitted.
• Do not stare into the light output from the luminaire. May be harmful to the eyes.
• Do not look at the luminaire's light output with optical instruments or any device that
may concentrate the light output.
• Make sure that persons working on or near the luminaire are not looking directly into
the light output when the luminaire lights up suddenly. This can happen when power
is applied, when the luminaire receives a DMX signal, or when certain control menu
items are selected.
• Provide well-lit conditions to reduce the pupil diameter of anyone working on or near
the luminaire.
6
impression® FR1 TM
User Manual
Advertisement
Table of Contents
