GLP impression FR1 TM User Manual page 18

www.glp.de
See Figure 8. Attach the free end of the safety
cable to the safety cable anchoring point in the
luminaire's baseplate using the lockable
carabiner clip (arrowed in Figure 8) on the end of
the safety cable. Fasten the lock on the carabiner
clip so that the safety cable cannot become
unfastened from the luminaire.
Check that the luminaire will be held securely by
the safety cable if the primary attachment
method fails.
Make sure that the head will not collide with
another luminaire or any other object when it tilts
and rotates.
If you are going to install another luminaire on the
same lighting track, allow a 1000 mm / 40 in.
center-to-center distance between luminaires, or
you may overload the lighting track and cause a
safety hazard.
18
Figure 8. Carabiner clip
impression® FR1 TM
User Manual