Starting The Engine (Manual -Starting Chipper) - DR RAPID-FEED 16.50 PRO Safety & Operating Instructions Manual

Choke
Control
Lever
"RUN"
Figure 16
Th rottle
Slow
Control
Lever
Figure 17
Starter
Cord
Figure 18
16.50 PRO DR
®
24 RAPID-FEED™ CHIPPER
"CHOKE"
Fast
Key
Switch
Start ing the Engine (Manual –Starting Chipper)
1. Ensure that the
position (Figure 14).
2. Move the Choke Control Lever to the "CHOKE"
position (Figure 16) (leave in the RUN position if th
engine is already warm).
3. Move the Throttle Control Lever to about half way
between Slow and Fast position (Figure 17).
4. Insert the Key into the key switch and slowly pull the
Starter Cord until you feel resistance, then pull quickly
(Figure 18). The Cord will recoil back into position.
5. As the engine warms up, slowly adjust the Choke to
the "Run" position (Figure 16). Wait until the engine
runs smoothly before each Choke adjustment.
6. When the Engine is warmed up and running smoothly
with the Choke in the "RUN" position, move the
Throttle Cont
for chipping.
Fuel Shut-Off Valve is in the "ON"
rol Lever to the fast position (rabbit icon)
e