DR RAPID-FEED 16.50 PRO Safety & Operating Instructions Manual page 36

Belt Guard
Hardware
Figure 26
Belt Guard
Hardware
Figure 27
Locknut
Figure 28
16.50 PRO DR
®
32 RAPID-FEED™ CHIPPER
T ools Needed:
Removing the Belt
1.
2. Remove the Belt Guard.
Belt
Guard
3. Remove the Locknut and Belt Guard Bracket (Figure
Belt Guard
Bracket
•
Tape Measure
•
Two 1/2" Wrenches
•
7/16" Wrench
•
Straightedge
Remove the eight Bolts, Lock Washers and Flat
Washers from the Belt Guard using a 1/2" Wrench
(Figures 26 and 27).
28).