SHUT DOWN THE ENGINE, WAIT FOR ALL MOVING PARTS TO COME TO A COMPLETE STOP,
REMOVE SPARK PLUG WIRE, DISCONNECT THE NEGATIVE BATTERY CABLE, THEN WAIT 5 MINUTES
BEFORE PERFORMING ANY MAINTENANCE PROCEDURE OR INSPECTION ON THE CHIPPER..
Troubleshooting Table (continued)
S
YMPTOM
The machine's wh
he machine's wh
track left or righ
track left or righ
t
t
while being towed.
while being towed.
16.50 PRO DR
®
50
RAPID-FEED™ CHIPPER
P
C
OSSIBLE
AUSE
⇒ Check the tire pressure. There should be 38 psi in each tire. There
⇒ Check the tire pressure. There should be 38 psi in each tire. There
eels
eels
should be 60 psi in ea
should be 60 psi in ea
ch tire if you have the road towing option.
ch tire if you have the road towing option.