Chapter 2; General Safety Rules; Labels - DR RAPID-FEED 16.50 PRO Safety & Operating Instructions Manual

CHAPTER 2

GENERAL SAFETY RULES

•
READ THIS SAFETY & OPERATING MANUAL BEFORE YOU USE THE 16.50 PRO DR RAPID-FEED
CHIPPER. BECOME FAMILIAR WITH THE OPERATION AND SERVICE RECOMMENDATIONS TO
ENSURE THE BEST PERFORMANCE FROM YOUR MACHINE.
•
THOROUGHLY INSPECT THE AREA IN WHICH YOU WILL BE WORKING AND REMOVE ALL
FOREIGN OBJECTS. LOOK FOR ROPE, WIRE, ETC., AND REMOVE THESE OBJECTS BEFORE
CHIPPING. INSERTING THESE OBJECTS INTO THE CHIPPER HOPPER COULD DAMAGE THE
MACHINE AND/OR CAUSE INJURY.
•
THIS IS A HIGH-POWERED MACHINE, WITH MOVING PARTS OPERATING WITH HIGH ENERGY
AT HIGH SPEEDS. YOU MUST USE PROPER CLOTHING AND SAFETY GEAR WHEN OPERATING
THIS MACHINE TO PREVENT OR MINIMIZE THE RISK OF SEVERE INJURY. THIS MACHINE CAN
CRUSH, GRIND, CUT, AND SEVER PARTS OF YOUR BODY IF THEY ENTER THE INLET OR
DISCHARGE AREA OF YOUR CHIPPER.

Labels

Your 16.50 PRO DR RAPID-FEED CHIPPER carries prominent labels as reminders for its proper and safe
us e. Shown below are copies of all the safety and operation labels that appear on the equipment. Take a
mo ment to study them and make a note of their location on your 16.50 PRO DR RAPID-FEED CHIPPER
as you assemble and before you operate the unit. Replace damaged or missing safety and operation
labels immediately.
#241801
www.DRpower.com or CALL TOLL FR EE 1-800-DR-OWNER
CONTACT US AT
242321
#
241851
#
3