Table of Contents
Advertisement
5) Use the CLR key to backspace if necessary.
6) Repeat steps 3 through 5 until the Grid Note is completed.
7) Press the OK key to save the Grid Note and return to the Grid List Items
menu, or ESC to cancel entering the Grid Note.
Setting the Coordinates of the Grid
Note: A grid is defined by using coordinates to define the Top Left and the
Bottom Right corners of the grid. Alpha coordinates are horizontal across the
top, and numeric coordinates are vertical down the side. Therefore, to define
the top left corner of the grid, there will be an (X,Y) coordinate. Where X is an
alpha column location across the top and Y is a numeric row location down the
side. Use the same logic when choosing the lower right corner.
1) Use the UP and DOWN arrow keys to scroll through the new Grid List
Items until TOP LEFT is highlighted.
MMX-7 Data Logging Ultrasonic Thickness Gauge
Setting the Top Left Coordinate
61
Advertisement
Table of Contents
