Table of Contents
Advertisement
MMX-7 Data Logging Ultrasonic Thickness Gauge
B-DEP: Provides the user the ability to change the overall depth of the viewable
measurement area. It functions a lot like a zoom on a camera. Refer to page 46 for
further info.
3.5 SETUP – Menu
Open: Displays a list of factory and user defined setups currently stored in memory.
These setups can be recalled and used at any time. Refer to page 75 for further info.
Save: Provides the user with the ability to save a custom setup that has been
modified or created by the user. Refer to page 77 for further info.
Default Setup: Loads a basic default setup. Use only as a last resort when the
setups in the MMX-7 have been corrupted and a computer is not accessible. Refer to
page 79 for further info.
Language: Provides the user the ability to select different languages for the MMX-7.
Refer to page 79 for further info.
3.6 DATA – Menu
New: Allows the user the ability to create a new alpha numeric grid with custom
parameters, rows, and columns depending on their application reporting
requirements. Refer to page 58 for further info.
Edit: Gives the user the ability to change parameters of grid that have been
previously saved. Note: Pre-defined coordinates cannot be changed once they have
been created. Refer to page 70 for further info.
Open: This function provides the user with the ability to recall grids that currently
exist in memory from a list of grids. Refer to page 72 for further info.
Delete One Grid: This function provides the user with the ability to delete one
individual grid from a list of multiple grids previously saved in memory. Refer to page
68 for further info.
Delete All Grids: This function provides the user with the ability to delete all grids
currently stored in memory. Refer to page 68 for further info.
15
Advertisement
Table of Contents
