Table of Contents
Advertisement
6) Press the OK key to select the setup and return to the menu screen, or ESC
to cancel the selection process.
7)
Press the MEAS key to return to the measurement screen.
Alternatively, the measurement mode can be simply selected from the Hot Menu
Items or selected from a sub menu feature as follows:
1)
Press the MEAS key once to activate measure menu items. Press the
MEAS key multiple times to move right and the ESC key multiple times to
move left, until the MODE cell is highlighted.
2)
Use the UP, DOWN, LEFT, or RIGHT arrow keys to scroll the modes P-E
(pulse-echo flaws and pits) and E-E (echo -echo thru paint) until the target
mode is selected.
Finally, the measurement mode can be selected from the menu items as follows:
MMX-7 Data Logging Ultrasonic Thickness Gauge
Hot Menu Selection
31
Advertisement
Table of Contents
