Table of Contents
Advertisement
The user can also access and adjust the B-DEP range from the tabbed menus.
However, this method is a more tedious than making the adjustments using the Hot
Menus. The procedure using the tabbed menus is outlined below:
Adjusting the Overall Depth (B-DEP) using the Tabbed Menus
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the DISP menu is highlighted and displaying the submenu items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until BSCAN DEPTH is highlighted.
3) Press the LEFT and RIGHT arrow keys to scroll the value. When the
correct width is being displayed, proceed to step 8.
4) Alternatively , press the ENTER key to display the Digits Edit Box.
5) Press the UP and DOWN arrow keys to scroll the highlighted value.
6) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
7) Repeat steps 5 & 6 until the Bscan Depth value is correctly displayed.
8) Press the OK key to set the Bscan Depth and return to the menu screen, or
ESC to cancel entering the Bscan Depth.
MMX-7 Data Logging Ultrasonic Thickness Gauge
47
Advertisement
Table of Contents
