Omron CJ-Series Operation Manual page 160

Built-in Outputs
Instructions Used
Preparation and PLC Setup Settings
Speed Settings Tables
(D00000 to D00001 and
D00010 to D00015)
• Low-speed jog operation (CCW) will be executed from pulse output 1
while input 2960.07 is ON.
Target frequency
1,000 Hz
CW Low-speed
JOG (2960.06)
CCW Low-speed
JOG (2960.07)
• High-speed job operation (CW) will be executed from pulse output 1 while
input 2960.08 is ON.
• High-speed jog operation (CCW) will be executed from pulse output 1
while input 2960.09 is ON.
Target frequency
100,000 Hz
CW High-speed jog
(2960.08)
CCW high-speed
jog (2960.09)
SPED(885) Starts and stops (immediate stop) the low-speed jog opera-
tions.
ACC(888) Starts and stops (decelerate to a stop) the high-speed jog
operations.
Setting details
Target frequency (low speed): 1,000 Hz
Acceleration rate: 100 Hz/4 ms
Target frequency (high speed): 100,000 Hz
Deceleration rate: 100 Hz/4 ms (Not used.)
Target frequency (stop): 0 Hz
Acceleration/de-
celeration rate
100 Hz/4 ms
Acceleration/de-
celeration rate
100 Hz/4 ms
Section 6-1
Address Data
D00000 #03E8
D00001 #0000
D00010 #0064
D00011 #86A0
D00012 #0001
D00013 #0064
D00014 #0000
D00015 #0000
141