Inta HTMWMCP Installation And Maintenance Instructions Manual page 16

Sterilization Process
5 - Fit the cold inlet plug into the hot
position and the hot into the
cold position
OPEN
90°
CLOSE
7 - Close the isolation
valve
By carrying out the above procedure you are sterilizing the complete tap with hot water
© Intatec Ltd 2016
6 - Open the ball valve on the hot
8 - Refit the hot inlet plug into the hot position
and the cold into the cold position and refit
the covers
Temperature
60˚C
65˚C
70˚C
10 - Disinfection times based
on water temperature
supply to start sterilization
procedure
Disinfection time
20 minutes
10 minutes
5 minutes
15
OPEN
90°
CLOSE
6A - Turn to open
position
OPEN
90°
CLOSE
9 - Open the isolation valve
and move the handle
to the closed position