Phantom-S Product Back Interface - Pylontech Phantom-S Product Manual

Pylon Technologies Co., Ltd.
No. 73, Lane 887, Zu Chongzhi Road, Zhangjiang Hi-Tech Park
Pudong, Shanghai 201203, China

Phantom-S Product Back Interface

Power Switch
Power Switch: BMS standby, no power output
RUN
RUN LED: to show the Power Switch is ON, and the equipment has electricity.
ADD Switch (5)
ADD Switch: 4 ADD switches, to definite different address code for each battery module when
multiple modules are cascaded, up to 8 addresses. But if all the battery cable connection is correct,
the ADD will distribute themselves, and not necessary to set.
Console
Console Communication Terminal: (RJ11 port) follow RS232 protocol, for manufacturer or
professional engineer to debug or service.
CAN
CAN Communication Terminal: (RJ45 port) follow CAN protocol, for output batteries information.
RS485
R485 Communication Terminal: (RJ45 port) follow RS485 protocol, for output batteries
information.
Link Port 0, 1
Link Port 0, 1 Communication Terminal: (RJ45 port) follow RS485 protocol, for communication
between multiple parallel batteries.
17PISV0704
9 / 22