Table of Contents
Advertisement
Display the software version information. Including device type, serial number, IP address, firmware version,
etc.
Factory Reset
Click the "Factory Reset", and pop-up window as follows:
Select "Remove the LOGO", and click "OK", the LOGO will be removed.
Select "Remove EDID", and click "OK", the EDID will be removed.
Power On Setting
Click the "Power On Setting", and pop-up window as follows:
Time-Lapse Power On: The adjustment range is 0~255, click "Set" after setting.
42
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: sales@rgblink.com
http://www.rgblink.cn
Advertisement
Table of Contents
