Table of Contents
Advertisement
Monitor Size and Position Setting: Move the mouse to the lower right brink of the monitor, and press the left
key of the mouse. Move the mouse to the suitable position and release the mouse. But this method can only
adjust the size and location roughly, if an accurate adjustment is needed, select the monitor, and set the X, Y,
width and height in the bottom of the interface.
Monitor Size changed equivalently: Select any monitor, for example, select monitor 1, and adjust the size. Click
this monitor, then press button C and don't let go, select the monitor that will set, the size of the selected
monitor will be changed to the same size of monitor 1, as shown in the figure below:
Rotation: Select the monitor, and set the rotation as 0°, 90°, 180° and 270° in the bottom of the interface. Click
"OK" to confirm. As shown in the figure below:
Right click the monitor can also rotate the monitor, and each output module can only swap one output.
Output Area Size Setting: Move the mouse to the output area and slide the mouse wheel, the output area size
can be zoom in and out. When zoom out the output area, press the wheel of the mouse will drag the whole
operation area.
Layer Setting
New Layer: In output screen zone of controlling software, press the left mouse key and drag on the intended
output screen to cover the whole current screen. And the below interface will be displayed. A layer can also be
opened by double clicking the left signal source to be shown on the window.
Adjust Layer: Two ways can change the size and location of the opened layer:
a. Drag the opened layer by mouse. The details are: move the mouse to the brink of the opened layer, when the
mouse shows"<—>", press the left key of the mouse and drag the window to a suitable size and then release
the mouse. Or move the mouse to the lower right of the opened layer, press the left key of the mouse and drag
24
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: sales@rgblink.com
http://www.rgblink.cn
Advertisement
Table of Contents
