Table of Contents
Advertisement
In preview mode, all the settings are displayed in the PST monitor, click "Take" or "Cut" in "Take" box to
seamless switch the signal to LED display. If select "Auto Take ON" or "Black Scene ON", the preview image will
seamless switch or black to LED display instantaneously.
Default outputs 2.4.6.8.10.12.14.16.18.20.22.24.26.28.30.32 as preview channel and
outputs1.3.5.7.9.11.13.15.17.19.21.23.25.27.29.31 as program channel.
3D-Mode
Click the "3D-Mode", and pop-up window as follows:
Click "OK", the system will synchronize the data, and it will finish about 5 seconds later, click "OK", it will enter
the interface as follows:
Default 2D-Mode, right click the signal, and select "Set Input 3D Type", it will enter the interface as follows:
33
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: sales@rgblink.com
http://www.rgblink.cn
Advertisement
Table of Contents
