Table of Contents
Advertisement
Select DSK ON, as shown in figure
, then set the input ports, including preset selection, custom
mode, alpha and color setting. Click "Set" to confirm.
Source Backup
Click the "Source Backup", and pop-up window as follows:
Enable the hot backup function, as shown in figure
, and set the backup signal for Hot Backup 1
to Hot Backup 8. It will switch to the backup signal if the signal is interrupted.
Source Merge
Click the "Source Merge", and pop-up window as follows:
35
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: sales@rgblink.com
http://www.rgblink.cn
Advertisement
Table of Contents
