Table of Contents
Advertisement
Select the serial connect and net connect, the software will search all the devices if not select "Search by this
configuration".
If select "Serial Connect" and "Search by this configuration", the software will search all the devices with
corresponding serial port.
If select "Net Connect" and "Search by this configuration", the software will search all the devices with
corresponding IP.
IP Settings
Click the "IP Settings", and pop-up window as follows:
Default "Auto get ip address". Users can also set IP address, mask and gateway manually. This is usually used if
one computer control some devices or remote control. It takes effect after reboot the software if change IP
through network.
System Information
Click the "System Information", and pop-up window as follows:
41
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: sales@rgblink.com
http://www.rgblink.cn
Advertisement
Table of Contents
