Table of Contents
Advertisement
Note
For example, set the top border, bottom border, left border and right border as 100, as shown in the figure
below:
Close monitor: Click the icon
shortcut
on the right side of the interface to close all monitors.
Reset monitor: User can reset the monitor by clicking the shortcut
Swap monitor: User can swap the monitor by clicking the shortcut
shown in the figure below.
Auto tile: User can enable or disable the auto tile function by clicking the auto tile shortcut
side of the interface. If select auto tile "ON', the layer will automatically snap to the output grid when move the
layer to the position within the threshold value.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Top border and bottom border, left border and right
border are changed equivalently. For example, if set
top border as 100, bottom border will be changed to
100 automatically, and if set left border as 200, right
border will be changed to 200 automatically.
on the top right corner of the monitor to close one monitor, or click the
23
on the right side of the interface.
on the right side of the interface, as
Tel: 00865925771197
Email: sales@rgblink.com
on the right
Fax: 00865925788216
http://www.rgblink.cn
Advertisement
Table of Contents
